|
NUMBER OF TESTS PERFORMED: 15
DATE OF LAST TEST: 06/23/2008
| Gradation |
| SIEVES (mm) |
MNDot Spec Limits for
CA-5 |
MNDot Spec
Median
for CA-5 |
NUQQ Running Avg. |
Sample Standards Deviation about Running Avg. |
NUQQ Production Wking Range |
% of 4 Consecutive tests inside of Wking Range |
1.0"
(25.0) |
100% |
100% |
100.0% |
0.0% |
100% |
100.0% |
0.75"
(19.0) |
85%
- 100% |
92.5% |
100.0% |
0.0% |
100% |
100.0% |
0.5"
(12.5) |
- |
- |
70.5% |
- |
- |
- |
0.375"
(9.5) |
30%
- 60% |
45.0% |
43.9% |
8.4% |
36% -
52% |
100.0% |
#4
(4.75) |
0%
- 10% |
5.0% |
3.9% |
1.4% |
3% - 5% |
100.0% |
| 3/4"
Clean will meet A.S.T.M. #67 specification for gradation. Values indicate the percentage by weight passing square opening sieves.
DISCLAIMER: The gradation and mechanical
test results included in this report are for information only. New Ulm Quartzite Quarries,
Inc. makes no representation or warranties either expressed or implied with respect to the
use of this information. New Ulm Quartzite Quarries, Inc. assumes no liability to anyone
for special, collateral, exemplary, indirect, incidental, consequential, or any other kind
of damage resulting from the use or application of this information. Customers and other
users of our products should exercise their independent judgment when using these products
for the purposes they intend. |
| General Quality |
| Quality
Parameters |
NUQQ Running Avg. |
MNDot Spec Limits |
Note |
| Non Class 'A' Material by Weight: |
3.2% |
10.0% Max.* |
Sandstone |
| L.A.R. Abrasion Loss (A.S.T.M. C131-89): |
27.6% |
40% Max. |
Toughness |
Magnesium
Sulfate Loss
(A.S.T.M. C88-90 - 5 Cycles): |
<10.0% |
15% Max. |
Soundness |
| Flat & Elongate Particles, (A.S.T.M. D-4791): |
0.0% |
10.0% Max. |
3:1
Ratio |
| Specific Gravity, (A.S.T.M. C127-88): |
2.63/2.66/2.64 |
N/A |
Bulk/Apparent/SSD |
| Absorption in Bulk Sample, (A.S.T.M. C126): |
<0.7% |
N/A |
Porosity |
| Unit Weight, PCF, (A.S.T.M. C29): |
88.4/82.3 |
N/A |
Dry Rodded/Loose |
| Voids, %, (A.S.T.M. C29): |
46.0%/49.8% |
N/A |
Dry Rodded/Loose |
Freeze thaw durability
(A.S.T.M. 666 Meth. A, 306 Cycles): |
88.5%/0.006% |
N/A |
RDME/Length Change |
A.S.R. Expansion,
(A.S.T.M. C-1293 @ 365 Days W/O Mitigators): |
0.123% |
- |
A.S.R. Reactivity |
A.S.R. Expansion,
(A.S.T.M. C-1293 @ 365 Days W/ 25% "Coal Creek" FA
Replacement): |
0.027% |
0.04%
Max. |
A.S.R. Reactivity |
A.S.R. Expansion,
(A.S.T.M. C-1260 @ 14 Days W/O Mitigators): |
0.220% |
- |
A.S.R. Reactivity |
200 Mesh, (75 Micron),
Material, (A.S.T.M. C117-90): |
<0.5% |
0.8% Max. |
Surface Dust |
*
Maximum non 'Class A' material for M.N.D.O.T. 3137 Class C aggregate specification: 10.0%.
Quartzite aggregates contain no shale, iron
oxide, slate, unsound chert or clay balls.
3/4" Clean meets all M.N.D.O.T. 3137
'Class C' quality specifications for concrete aggregate and, when applicable, meets MNDOT
QA/QC bonus criteria for <15% carbonate in the 'Class C'. |
Sieve Test Values for the
Most Recent Four Tests |
SIEVES
(mm) |
MNDot Spec Limits |
NUQQ Production Wking Range |
NUQQ Moving AVG. |
Last Four Tests |
|
08/27/07 |
08/31/07 |
09/24/07 |
10/01/07 |
1.0"
(25.0) |
100% |
100% |
100.0% |
100.0% |
100.0% |
100.0% |
100.0% |
0.75"
(19.0) |
85%-100% |
100% |
99.8% |
99.8% |
99.9% |
99.7% |
99.8% |
0.5"
(12.5) |
- |
- |
67.3% |
70.0% |
68.0% |
64.0% |
67.0% |
0.375"
(9.5) |
30%-60% |
40%-60% |
40.0% |
42.0% |
42.0% |
39.0% |
37.0% |
#4
(4.75) |
0%-10% |
3%-8% |
3.8% |
3.1% |
4.2% |
4.6% |
3.2% |
Values
indicate the percent by weight passing square opening sieves. |
|
